Skip to content

    Press Enter for all results · Esc to close

    To Separate sand and calcium carbonate

    Updated3 min read
    On this page
    1. Experiment 2: TO SEPARATE SAND AND CALCIUM CARBONATE.
    2. OBJECTIVE
    3. APPARATUS REQUIRED
    4. CHEMICAL REQUIRED
    5. THEORY
    6. PROCEDURE
    7. OBSERVATION TABLE
    8. PURITY TEST FOR SAND (AgNO3 test)
    9. TEST REACTION
    10. PURITY TEST FOR CaCO3 [TEST FOR Cl– and CO3—]
    11. RESULT
    12. CONCLUSION
    13. PRECAUTION

    Experiment 2: TO SEPARATE SAND AND CALCIUM CARBONATE.

    OBJECTIVE

    TO SEPARATE SAND AND CALCIUM CARBONATE IN THE PURE AND DRY STATE FROM THE GIVEN MIXTURE OF SAND AND CALCIUM CARBONATE BY THE PHYSIOCHEMICAL METHOD.

    APPARATUS REQUIRED

    Porcelain basin, filter paper, glass rod, funnel, wash bottle, tripod stand and wire gauze.

    CHEMICAL REQUIRED

    A mixture of sand and CaCO3, dil.HCl, Na2CO3, AgNO3

    THEORY

    Both sand and CaCO3 are insoluble in water but CaCO3 is dissolved in mineral acid. When the mixture of Sand and CaCO3 is treated with dil HCl, CaCO3 is decomposed to give CaCl2 solution while sand is unaffected.

    Sand + CaCO3 + 2HCl → Sand + CaCl2 + CO2 + H2O

    On filtration, the sand remains as residue while calcium chloride solution is obtained as filtrate. The sand is washed with water till it is free from Cl– ion. Filtrate on treating with precipitating reagent as Na2CO3 solution produces a white precipitate of CaCO3. The mixture is heated, and filtered and the residue is washed with hot water and then dried to get pure CaCO3.

    CaCl_{2}+Na_{2}CO_{3}\rightarrow \underset{White\ ppt.}{CaCO_{3}}+2NaCl

    PROCEDURE

    A mixture of sand and calcium carbonate of about 3 gm is taken in a beaker and dil HCl is added in minimum amounts till the evolution of CO2 is stopped. The reaction mixture is filtered and filtrate of the first time is collected in which residue contains sand. But Filtrate contains CaCl2 solution. The residue is washed several times and the washed sand is dried. The filtrate is made slightly alkaline and then sodium carbonate solution is added The reaction mixture is warmed, and filtered and the precipitate of CaCO3 is washed by water to get the free form of chloride ion. The presence of Cl– is checked by the AgNO3 solution. The precipitate is dried.

    OBSERVATION TABLE

    PURITY TEST FOR SAND (AgNO3 test)

    ExperimentObservationInference
    Before washing:
    2 ml of washing sand is taken into the
    test tube and a few drops of AgNO3 are added
    to it.

    A curdy white precipitate is obtained

    Presence of Cl– in sand
    Before washing:
    2 ml of washing sand is taken into the
    test tube and a few drops of AgNO3 are added
    to it.

    Curdy white precipitate is not obtained


    Absence of Cl– in sand

    TEST REACTION

    Cl^{-}+AgNO_{3}\rightarrow \underset{Curdy\ white\ ppt.}{AgCl}+NO_{3}^{-}

    PURITY TEST FOR CaCO3 [TEST FOR Cl– and CO3—]

    ExperimentObservationInference
    Before washing:

    Few cc of washing liquid of CaCO3 is taken in the two test tubes, and a few drops of AgNO3 and BaCl2 solution are added
    separately.
    White precipitate is obtained.CaCO3 is impure (Presence of Cl– and CO3—
    After washing:

    Few cc of washing liquid of CaCO3 is taken in the two test tubes, and a few drops of AgNO3 and BaCl2 solution are added
    separately.
    White precipitate is not obtained.CaCO3 is pure. (Absence of Cl– and CO3—).
    \begin{align*}
    Cl^{-}+AgNO_{3} &\rightarrow \underset{white\ ppt.}{AgCl}+NO_{3}^{-}\\
    CO_{3}^{--}+BaCl_{2} &\rightarrow \underset{white\ ppt.}{BaCO_{3}}+2Cl^{-}
     \end{align*}

    RESULT

    Calcium carbonate was separated from the mixture of sand and calcium carbonate.

    CONCLUSION

    The mixture containing acid soluble and acid insoluble substances can be separated by dissolution followed by precipitation.

    PRECAUTION

    1. Precipitation should be completed.
    2. CaCO3 should be completely dissolved in dil. HCl.
    3. Cl– ion should be completely washed away.
    4. The stem of the funnel should be touched with a beaker.
    To Separate sand and calcium carbonate

    Questions & discussion

    Have a question, or found this note helpful? Be the first to comment.

    Ask a question or share feedback

    Your email is never shown publicly.