Skip to content

    Press Enter for all results · Esc to close

    Halogens

    Updated4 min read
    On this page
    1. Position of halogens in periodic table:
    2. General characteristics of halogens:
    3. Laboratory preparation of chlorine:
    4. Laboratory preparation of bromine:
    5. Laboratory preparation of iodine:
    6. Chemical properties:
    7. Uses of chlorine:
    8. Uses of bromine:
    9. Uses of Iodine:
    10. Test of Chlorine(Cl2):
    11. Test of Bromine(Br2):
    12. Test of Iodine(I2):
    13. Some Important Questions

    Position of halogens in periodic table:

    The elements fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At) belong to the group VIIA or 17 in the periodic table collectively known as halogens which means sea salt producer.

    halogen elements table


    General characteristics of halogens:

    1. All elements have seven electrons (ns2 np5) in their outermost shell.
    2. They exist as diatomic molecules (F2, Cl2, Br2, I2) containing a single covalent bond.
    3. The m.p. and b.p. are in the order: F2 < Cl2 < Br2 < I2
    4. The order of electronegativity is F2 > Cl2 > Br2 > I2
    5. The order of electron affinity is : Cl2 > F2 > Br2 > I2
    6. The size of halogens is in the order: F2 < Cl2 < Br2 < I2
    7. Halogens are less soluble as their solubility decreases with an increase in atomic number.


    Laboratory preparation of chlorine:

    Chlorine is prepared in the laboratory by heating a mixture of sodium chloride, manganese dioxide and concentrated sulphuric acid.

    2NaCl + 3H2SO4 + MnO2 → 2NaHSO4 + MnSO4 + Cl2 + 2H2O


    Laboratory preparation of bromine:

    Bromine is prepared in the laboratory by heating a mixture of sodium bromide, manganese dioxide and concentrated sulphuric acid.

    2NaBr + 3H2SO4 + MnO2 → 2NaHSO4 + MnSO4 + Br2 + 2H2O


    Laboratory preparation of iodine:

    Iodine is prepared in the laboratory by heating a mixture of potassium iodide, manganese dioxide and concentrated sulphuric acid.

    2KI + 3H2SO4 + MnO2 → 2KHSO4 + MnSO4 + I2 + 2H2O


    Chemical properties:

    1. Action with water: Chlorine and bromine react with water to give hypohalous acid. Hypohalous acids are unstable.

      Cl2 + H2O → HCl + HOCl (Hypochlorous acid)
      2HOCl → 2HCl + O2
      Br2 + H2O → HBr + HOBr
      2HOBr → 2HBr + O2

      Iodine has little action with water but dissolves in the aqueous solution of KI.
      I2 + KI → KI3
    1. Action with NaOH:

      Cl2 + 2NaOH(cold & dil.) → NaCl + H2O + NaClO(Sodium hypochlorite)

      3Cl2 + 6NaOH(hot & conc.) → 5NaCl + 3H2O + NaClO3(Sodium chlorate)

      Br2 + 2NaOH(cold & dil.) → NaBr + H2O + NaBrO(Sodium hypobromite)

      3Br2 + 6NaOH(hot & conc.) → 5NaBr + 3H2O + NaBrO3(Sodium bromate)

      I2 + NaOH(cold & dil.) → NaI + HOI(Hypoiodous acid)

      3I2 + 6NaOH(hot & conc.) → 5NaI + 3H2O + NaIO3(Sodium iodate)
    1. Action with ammonia:

      8NH3(excess) + 3Cl2 → N2 + 6NH4Cl

      2NH3 + 6Cl2(excess) → 2NCl3 + 6HCl

      8NH3(excess) + 3Br2 → N2 + 6NH4Br

      2NH3 + 3Br2(excess) → 2NBr3 + 6HBr

      2NH3 + 3I2 → 2NI3 + 6HI
    1. Oxidizing nature: Halogens are good oxidizing agents. Their oxidizing power is in the order: F2>Cl2>Br2>I2

    i. Mutual displacement:

    Fluorine displaces other halogens from their aqueous salt.
    F2 + 2NaCl → 2NaF + Cl

    Chlorine displaces Br2 and I2 from their salt solution.
    Cl2 + 2KBr → 2KCl + Br2
    Cl2 + 2KI → 2KCl + I2

    Bromine displaces iodine from iodide salt.
    Br2 + 2KI → 2KBr + I2

    ii. with H2S:
    H2S + Cl2 → 2HCl + S

    iii. With SO2:
    SO2 + 2H2O + Cl2 → 2HCl + H2SO4

    iv. with Na2SO3:
    Na2SO3 + H2O + Cl2 → 2HCl + Na2SO4

    v. with Na2S2O3(sodium thiosulphate):
    Na2S2O3 + H2O + Cl2 → 2HCl + Na2SO4 + S

    2Na2S2O3 + I2 → Na2S4O6(Sodium tetrathionate) + 2NaI

    1. Bleaching action: Chlorine changes colored compounds into colorless. This process is called bleaching. Bleaching action is permanent and is due to oxidation.

      H2O + Cl2 → HCl + HOCl
      HOCl → HCl + [O]
      [O] + colored substance → colorless substance

    Uses of chlorine:

    • To purify drinking water.
    • As a bleaching agent.
    • To prepare DDT, BHC, phosgene gas, chloroform, etc.

    Uses of bromine:

    • AgBr is used in photography.
    • Manufacture of dyes, drugs, etc.
    • To detect unsaturation in organic compounds.

    Uses of Iodine:

    • Manufacture of Iodoform.
    • AgI is used in photography.
    • Treatment of goitre.
    • Used as an antiseptic (tincture of iodine). Tincture is iodine dissolved in ethyl alcohol in presence of little KI.

    Test of Chlorine(Cl2):

    It turns starch iodide paper into blue.
    Cl2 + 2KI → 2KCl + I2
    I2 + starch → blue

    Test of Bromine(Br2):

    It turns starch iodide paper into blue.
    Br2 + 2KI → 2KBr + I2
    I2 + starch → blue

    Test of Iodine(I2):

    It turns moist starch paper into blue.
    I2 + starch → blue

    Some Important Questions

    1. Give the balanced chemical reaction for the preparation of chlorine in the lab. Write the action of hot conc. NaOH on bromine.
    2. Arrange the halogens (Cl2, Br2, I2) in terms of atomic radii, reactivity, electronegativity, electron affinity, bleaching action and oxidizing nature.


    Questions & discussion

    Have a question, or found this note helpful? Be the first to comment.

    Ask a question or share feedback

    Your email is never shown publicly.